dmesg - AMD FX-8150 Eight-Core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-22-generic (buildd@komainu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #34-Ubuntu SMP Tue Jan 8 21:47:00 UTC 2013 (Ubuntu 3.5.0-22.34-generic 3.5.7.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000befeefff] usable
BIOS-e820: [mem 0x00000000befef000-0x00000000bf07bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf07c000-0x00000000bf158fff] reserved
BIOS-e820: [mem 0x00000000bf159000-0x00000000bf159fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf2a9fff] reserved
BIOS-e820: [mem 0x00000000bf2aa000-0x00000000bf2aafff] ACPI NVS
BIOS-e820: [mem 0x00000000bf2ab000-0x00000000bf2bafff] reserved
BIOS-e820: [mem 0x00000000bf2bb000-0x00000000bf2bbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf2bc000-0x00000000bf2c2fff] ACPI data
BIOS-e820: [mem 0x00000000bf2c3000-0x00000000bf2c8fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf2c9000-0x00000000bf2effff] reserved
BIOS-e820: [mem 0x00000000bf2f0000-0x00000000bf4f2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf4f3000-0x00000000bf780fff] usable
BIOS-e820: [mem 0x00000000bf781000-0x00000000bfef2fff] reserved
BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: MSI MS-7640/990XA-GD55 (MS-7640), BIOS V22.5 10/12/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFF00000 mask FFFFFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcde0-0x000fcdef] mapped at [ffff8800000fcde0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbfefffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfefffff] page 4k
kernel direct mapping tables up to 0xbfefffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
[mem 0x200000000-0x23effffff] page 2M
kernel direct mapping tables up to 0x23effffff @ [mem 0xbfefc000-0xbfefffff]
RAMDISK: [mem 0x362e2000-0x37168fff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf2bc068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf2c1f20 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 00000000bf2bc140 05DDE (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf2c3f80 00040
ACPI: APIC 00000000bf2c2018 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bf2c20b8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bf2c20f8 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: BGRT 00000000bf2c2130 0003C (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23effc000-0x23effffff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xbefeefff]
node 0: [mem 0xbf4f3000-0xbf780fff]
node 0: [mem 0xbfef3000-0xbfefffff]
node 0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 2089495
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 762570 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1286207 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000befef000 - 00000000bf07c000
PM: Registered nosave memory: 00000000bf07c000 - 00000000bf159000
PM: Registered nosave memory: 00000000bf159000 - 00000000bf15a000
PM: Registered nosave memory: 00000000bf15a000 - 00000000bf2aa000
PM: Registered nosave memory: 00000000bf2aa000 - 00000000bf2ab000
PM: Registered nosave memory: 00000000bf2ab000 - 00000000bf2bb000
PM: Registered nosave memory: 00000000bf2bb000 - 00000000bf2bc000
PM: Registered nosave memory: 00000000bf2bc000 - 00000000bf2c3000
PM: Registered nosave memory: 00000000bf2c3000 - 00000000bf2c9000
PM: Registered nosave memory: 00000000bf2c9000 - 00000000bf2f0000
PM: Registered nosave memory: 00000000bf2f0000 - 00000000bf4f3000
PM: Registered nosave memory: 00000000bf781000 - 00000000bfef3000
PM: Registered nosave memory: 00000000bff00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xbff00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052689
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2410000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 8063684k/9420800k available (6719k kernel code, 1062820k absent, 294296k reserved, 6451k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1288 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3870.368 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7740.73 BogoMIPS (lpj=15481472)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 25143 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD FX(tm)-8150 Eight-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (61925.88 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbefef000-0xbf07bfff] (577536 bytes)
PM: Registering ACPI NVS region [mem 0xbf159000-0xbf159fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbf2aa000-0xbf2aafff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbf2bb000-0xbf2bbfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbf2c3000-0xbf2c8fff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xbf2f0000-0xbf4f2fff] (2109440 bytes)
dummy:
RTC time: 2:16:00, date: 01/19/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
Freeing initrd memory: 14876k freed
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:06.0: [1814:3062] type 00 class 0x028000
pci 0000:04:06.0: reg 10: [mem 0xfe800000-0xfe80ffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbefef000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf781000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [io 0x0485-0x0486]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xff800000-0xffffffff]
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [io 0x0485-0x0486] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xff800000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0a00-0x0a0f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x03f8-0x03ff]
pnp 00:04: [irq 4]
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0c: [mem 0xfec20000-0xfec200ff]
system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xfed00000-0xfed003ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1358561760.736:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15907
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ioremap: invalid physical address 3aa201800000001
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/ioremap.c:83 __ioremap_caller+0x372/0x380()
Hardware name: MS-7640
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.5.0-22-generic #34-Ubuntu
Call Trace:
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_null+0x1a/0x20
[] __ioremap_caller+0x372/0x380
[] ? bgrt_init+0x47/0x126
[] ? acpi_get_table_with_size+0x5f/0xbe
[] ? acpi_hed_init+0x30/0x30
[] ioremap_nocache+0x17/0x20
[] bgrt_init+0x47/0x126
[] do_one_initcall+0x12a/0x180
[] kernel_init+0x140/0x1c9
[] ? loglevel+0x31/0x31
[] kernel_thread_helper+0x4/0x10
[] ? start_kernel+0x3d2/0x3d2
[] ? gs_change+0x13/0x13
---[ end trace 3fb02dd8615724b8 ]---
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-22-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-22-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-22-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-22-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-22-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-22-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-22-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe900000
xhci_hcd 0000:03:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.5.0-22-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.5.0-22-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:324:258
rtc_cmos 00:06: setting system clock to 2013-01-19 02:16:01 UTC (1358561761)
powernow-k8: Found 1 AMD FX(tm)-8150 Eight-Core Processor (8 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222BB SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
udevd[123]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 80 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc900117a4000, 8c:89:a5:dd:27:24, XID 0c900800 IRQ 80
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
usb 4-5: new low-speed USB device number 2 using ohci_hcd
usb 4-5: New USB device found, idVendor=04fc, idProduct=05d8
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: RBW Butterfly Desktop
usb 4-5: Manufacturer: MLK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MLK RBW Butterfly Desktop as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK RBW Butterfly Desktop] on usb-0000:00:12.0-5/input0
sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
input: MLK RBW Butterfly Desktop as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
sunplus 0003:04FC:05D8.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK RBW Butterfly Desktop] on usb-0000:00:12.0-5/input1
Refined TSC clocksource calibration: 3870.102 MHz.
Switching to clocksource tsc
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
usb 7-4: new low-speed USB device number 2 using ohci_hcd
usb 7-4: New USB device found, idVendor=046d, idProduct=c521
usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-4: Product: USB Receiver
usb 7-4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.0/input/input4
hid-generic 0003:046D:C521.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:16.0-4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.1/input/input5
hid-generic 0003:046D:C521.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-4/input1
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1309317
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3407314
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3403910
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3403913
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1309235
EXT4-fs (sda5): 5 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 9764860k swap on /dev/sda1. Priority:-1 extents:1 across:9764860k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[401]: starting version 175
lp: driver loaded but no devices found
microcode: CPU0: patch_level=0x06000629
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xbafe00 already in use
MCE: In-kernel MCE decoding enabled.
device-mapper: multipath: version 1.4.0 loaded
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU1: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU2: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU3: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU4: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU5: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU6: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU7: patch_level=0x06000629
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EDAC MC: Ver: 2.1.0
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1462:0x2125).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
ATOM BIOS: 113
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4074014 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 81 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CAICOS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022f2a5c00
[drm] ring test on 0 succeeded in 2 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 3686400
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x45
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 82 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
type=1400 audit(1358561773.465:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
type=1400 audit(1358561773.465:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=789 comm="apparmor_parser"
type=1400 audit(1358561773.465:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=790 comm="apparmor_parser"
type=1400 audit(1358561773.465:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
type=1400 audit(1358561773.465:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser"
type=1400 audit(1358561773.465:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=790 comm="apparmor_parser"
type=1400 audit(1358561773.465:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
type=1400 audit(1358561773.465:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser"
type=1400 audit(1358561773.465:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=790 comm="apparmor_parser"
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1012) killed by TERM signal
type=1400 audit(1358561788.737:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1114 comm="apparmor_parser"
type=1400 audit(1358561788.737:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1114 comm="apparmor_parser"
type=1400 audit(1358561788.737:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1114 comm="apparmor_parser"
type=1400 audit(1358561788.801:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1120 comm="apparmor_parser"
type=1400 audit(1358561788.817:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1117 comm="apparmor_parser"
type=1400 audit(1358561789.061:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1118 comm="apparmor_parser"
type=1400 audit(1358561789.061:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser"
type=1400 audit(1358561789.061:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1118 comm="apparmor_parser"
type=1400 audit(1358561789.061:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1119 comm="apparmor_parser"
type=1400 audit(1358561789.061:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=1118 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
wlan0: authenticate with f4:ec:38:e0:ad:50
wlan0: send auth to f4:ec:38:e0:ad:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:ec:38:e0:ad:50 (try 1/3)
wlan0: associate with f4:ec:38:e0:ad:50 (try 2/3)
wlan0: associate with f4:ec:38:e0:ad:50 (try 3/3)
wlan0: association with f4:ec:38:e0:ad:50 timed out
wlan0: authenticate with f4:ec:38:e0:ad:50
wlan0: send auth to f4:ec:38:e0:ad:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:ec:38:e0:ad:50 (try 1/3)
wlan0: RX AssocResp from f4:ec:38:e0:ad:50 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready